Linears residential telephone entry system is the first to utilize cast stainless steel for its inherent strength and striking appearance. This housing can take hits from both Mother Nature and vandals and maintain its functional integrity and good looks. As an alternative to this stainless housing, the RE-1 and RE-2 also come in cast zinc with a powder coated nickel finish. White down lighting that is both dramatic and practical is provided by an extremely long-life white LED source. The use of surface mount technology (SMT) for all electronic components minimizes the effects of interference from electro static discharge and protects against damage from lightning strikes.
The call forwarding feature allows a visitor to contact the resident at a programmed telephone number instead of through the on-site telephones. The feature can be set to be active during a selected time (set with the system's seven unique time zone schedules) or at all times. The telephone number programmed can contain an extension number and an optional time delay before dialing the extension. The call forwarding feature can also be set to call the on-site telephones first, then if there's no answer, place a call to the programmed forwarding telephone number. During the forwarded call, the access relays can be controlled simply by using the telephone's keypad.
STANDARD EQUIPMENT
RE-1 and RE-2: residential telephone entry systems that are capable of sharing an existing phone line, a dedicated line, and dialing out up to 3 additional off site numbers or used as an intercom; integral keypad used to accept entry codes; integral radio receiver will accept signals from block coded transmitters; built-in clock calendar; voice prompts; accepts one remote keypad; provisions for dealer installed (not included) Knox switch; telephone bypass switch
AVAILABLE ACCESSORIES
RE-BWC: RE-1 field upgradable black & white CCTV camera systems which includes infrared illuminators for clear picture in low/no light conditions; powered by the RE-1 CCM-2: RE-2 field upgradable color CCTV camera; powered by the RE-2 CPDM-1 Digital Modulator: Converts camera video signal to a UHF or CATV channel television signal AM-KP: auxiliary wired keypad used for accepting entry codes to control a second door or gate Block Coded Transmitters: programming remotes into the RE-1s integral radio receiver can be done with just a few keystrokes RE-2 Trim Rings
• For the RE-2N use trim-ring P/N ACP00915
• For the RE-2SS use trim-ring P/N ACP00917
